Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7235010.png)
-
Remove relevant door trim.
-
Disconnect electrical connector - 3 -.
-
Turn socket - 1 - to the left and pull out at lighting wire - 2 -.
Installing
Install in reverse order of removal, observing the following:
-
Insert light bulb for door opener light into opening and engage.
-
Install respective door trim.
Central Locking -SAFE- Indicator Lamp
Removing
-
Switch off ignition and remove ignition key.
-
Remove front door trim.
-
Release the retaining clips - arrows -.
-
Remove the central locking LED - 1 - down out of the door trim - 2 -.
Installing
Install in reverse order of removal, observing the following:
