Q7 Quattro V6-3.6L (BHK) (2007)
Front Door Panel: Service and Repair
Seat Memory Program Control Trim/Mount
Seat Memory Program Control Trim/Mount
Removing
Passenger side door trim:
-
Remove door handle.
Procedure for both sides:
-
Remove door trim.
-
Remove door release mechanism.
-
Press clips to side - arrow - and remove Seat Memory Program Control - 2 - (left: (E97); right: (E277)) from door release mechanism - 1 -.
-
Release clips - 2, 3, 5 -.
-
Remove trim/mount - 4 - for seat memory program control (memory seat) from door release mechanism - 1 - - arrow -.
Installing
To install, perform the steps used in removal in reverse order.