Q7 Quattro V6-3.6L (BHK) (2007)
Front Door Panel: Service and Repair
Front Door Trim
Front Door Trim
Special tools, testers and auxiliary items required
‹› Trim removal wedge (T10039/1)
Removing
-
Switch off ignition and remove ignition key.
-
Remove trim panel.
Driver side door trim:
-
Carefully pry cover - 2 - out of clips - arrow - using a flat screwdriver - 3 -.
-
On vehicles with Lane Change Assistance Button (E530), disconnect electrical connector.
-
Remove rubber cover - 1 - from door handle.
-
Remove bolts - arrows -.