Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7227001.png)
Front Door Panel: Service and Repair
Inside Door Release Mechanism
Inside Door Release Mechanism
Removing
Passenger side door trim:
-
Remove door handle.
Procedure for both sides:
-
Remove door trim.
-
Disconnect electrical harness connectors - 1 to 3 -.
-
Remove bolts - arrows -.
-
Remove door release mechanism from door trim.
Installing
To install, perform the steps used in removal in reverse order.
‹› Tightening specifications refer to => [ Interior Side Door Trim Component Overview ] See: Front Door Trim Overview.
