Q7 Quattro V6-3.6L (BHK) (2007)
Rear Door Panel: Service and Repair
Rear Door Lamps and Switches
Rear Door Lamps and Switches
Left/Right Rear Window Switch
Removing
-
Switch off ignition and remove ignition key.
-
Remove rear door trim.
-
Detach insulating mat from door trim.
-
Carefully release catches - arrows - using a small screwdriver.
-
Pull rear window switch - 1 - downward out of switch mount.
-
Disconnect electrical connector - 2 -.
Installing
Install in reverse order of removal, observing the following:
-
Press rear window switch in door into switch mount until catches engage.
-
Install rear door trim.
Rear Door Ashtray Lamp
Removing