Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7258004.png)
-
Disconnect electrical connector - 2 - on speaker.
-
Remove door trim.
Installation
Installation is in reverse order of removal, noting the following:
-
Engage end of cable - 1 - in door release mechanism lever.
‹› Cable end must point upward.
-
Engage release - 3 - securely in bracket - 2 -.
‹› Tightening specifications, refer to => [ Interior Door Trim Component Overview ] See: Rear Door Trim Overview.
