Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove door seal all around.
-
Carefully remove any remaining adhesive.
Installing:
-
Adhesion area must be free of dust and grease.
-
Clean all around adhesion area with cleaning solution D 009 401 04.
-
Clip door seal onto B-pillar and C-pillar with clips.
-
Press door seal firmly into door edge in stages.
-
Press on door seal all around with a Roller 3356.
NOTE: Part numbers are for reference only. Always check with your Parts Department for the latest part number information
3
-
Clip
4
-
Door inner panel
Inner door seal, removing and installing
1
-
Inner door seal
-
Connected all around on body flange
-
To remove, remove from body flange.
-
When installing, align seal with joint centered on lower hinge and press it by hand onto body flange.