Q7 Quattro V6-3.6L (BHK) (2007)
Trunk / Liftgate Interior Trim Panel: Removal and Replacement
Rear Lid Trim, Component Overview
Rear Lid Trim, Component Overview
NOTE: Component designation relates to direction of travel.
1
-
Upper center trim
-
Is clipped to rear lid with 5 clamps
2
-
Upper left trim
-
Is secured to rear lid with 2 clamps and a screw
3
-
Screw
-
3 Nm
4
-
Lower trim
-
Can only be removed after removing upper trim
5
-
Cover
-
For inner left tail lamp
-
Unclip with Trim Removal Wedge 3409
-
There is a lower trim screw located behind cover
6
-
Left luggage compartment lights
-
Unclip with Trim Removal Wedge 3409
7
-
Cover
-
For luggage compartment emergency release
8
-
Rear lid lock trim
-
Inserted in lower trim
9
-
Screw
-
3 Nm
-
2 screws are only accessible after removing warning triangle
-
2 screws are located under inner tail lamp covers
10
-
Right luggage compartment lights
-
Is not installed on all vehicles
11
-
Rear Lid Lock Button (in luggage compartment) E406
-
is not installed on all vehicles