Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7358005.png)
6
Locking nut
‹› Before removing drive unit, loosen lock nuts on eccentric bolts.
‹› Release eccentric bolt tension in hinge arm by rotating hex head to right, if necessary.
‹› Self-locking
‹› 6 Nm
7
Hex head eccentric bolts
‹› Upon tightening locking nuts, eccentric bolts are braced in hinge with no play.
‹› For this reason, you cannot counterhold eccentric bolt hex head with an open end wrench when tightening locking nuts.
‹› When removing drive unit, this tension is released with a small turn to the right on eccentric bolt hex head, after you have loosened locking nuts.
