Q7 Quattro V6-3.6L (BHK) (2007)
Trunk / Liftgate Switch: Service and Repair
Rear Lid Remote Control Lock Switch E233 and Fuel Tank Lid Unlock Button E319, Removing and
Installing
Rear Lid Remote Control Lock Switch E233 And Fuel Tank Lid Unlock Button E319, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove front door trim.
-
Detach insulating mat from door trim.
-
Disconnect electrical connector - 2 - on Rear Lid Remote Control Lock Switch E233 and Fuel Tank Lid Unlock Button E319 - item 1 -.
-
Carefully release catches - A arrows - using a small screwdriver.
-
Press Rear Lid Remote Control Lock Switch E233 and Fuel Tank Lid Unlock Button E319 down out of switch mount - arrow B -.
Installing
Install in reverse order, observing the following:
-
Press switch into switch mount until fasteners engage.
-
Install front door trim.
