Q7 Quattro V6-3.6L (BHK) (2007)
7
Nut
‹› Self-locking
‹› Always replace after removal.
8
Coupling Rod
‹› Removal and installation, refer to => [ Coupling Rod ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Rear
Suspension/Coupling Rod.
‹› The aluminum coupling rod has been replaced with a steel one. Do not install both types together.
9
Stabilizer
‹› Removal and installation, refer to => [ Anti-Roll Bar ] See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Rear
Suspension/Anti-Roll Bar.
10
Nut, 100 Nm
‹› Self-locking
‹› Always replace after removal.
11
Bolt, 90 Nm + 120°
‹› Always replace after removal.