Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7397006.png)
‹› Mount the (10 - 222 A /19) to the notches on the longitudinal member. Push the left refrigerant lines to the side and out of the way.
-
Engage hooks on both (10 - 222 A /10) at rear engine lifting eyes.
-
Slide (T40091/2) with both (T40093/5) in both (T40093/4).
-
Install long spindles from Engine Support Bridge (10-222 A) and engage spindle hooks at both front engine lifting eyes.
CAUTION!
Secure (T40091/2) with connector pins and (T40093/4).
-
Tension engine by tightening 4 spindles evenly.
Affects vehicles with 3.0L TDI engine
