Q7 Quattro V6-3.6L (BHK) (2007)
Installing
Installation is the reverse of removal, with special attention to the following:
Tightening specifications: refer to => [ Subframe, Stabilizer Bar and Coupling Rod Assembly Overview ] See: Steering and
Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Stabilizer Bar and Coupling Rod Assembly Overview.
Tightening specifications: refer to => [ Steering Gear to Subframe Assembly Overview ] See: Steering and Suspension/Steering/Steering Gear/Service
and Repair/Removal and Replacement/Steering Gear to Subframe Assembly Overview.
-
Tighten the propshaft.
-
Tighten the wheels.
-
On vehicles with air suspension, position vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Steering and
Suspension/Suspension/Service and Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Bleed steering system. Refer to => [ Steering System, Bleeding after Reconstructing ] See: Steering and Suspension/Steering/Power
Steering/Power Steering Bleeding/Service and Repair.
-
Check power steering fluid level. Refer to => [ Power Steering, Checking Hydraulic Oil Level ] See: Steering and Suspension/Steering/Testing
and Inspection/Power Steering, Checking Hydraulic Oil Level.
-
Check steering system for leaks. Refer to => [ Steering System, Checking for Leaks ] See: Steering and Suspension/Steering/Testing and
Inspection/Steering System, Checking for Leaks.