Q7 Quattro V6-3.6L (BHK) (2007)
‹› Tightening specification - 1.2 Nm
6
Cupholder
‹› Removing and Installing, refer to => [ Cupholder ] See:
7
Upper trim
‹› For front center armrest
‹› Clipped with - 14 -
‹› Removing and Installing, refer to => [ Front Center Armrest Upper Trim ] See:
8
Inlay Mat
‹› For cupholder
9
Padding
‹› Removing and Installing, refer to => [ Front Center Armrest Upholstery ] See:
10
Bolt
‹› Tightening specification - 0.9 Nm
11
Cover
12
Carrier
‹› For front center armrest
‹› Removing and Installing, refer to => [ Front Center Armrest Carrier ] See:
13
Bolt
‹› Tightening specification - 0.9 Nm
14
Lower Trim
‹› For front center armrest
‹› Clipped with - 7 -
‹› Removing and Installing, refer to => [ Front Center Armrest Upper Trim ] See:
15
Bolt
‹› Tightening specification - 1.4 Nm
16
Support Foot Cover
‹› For front center armrest
17
Bolt
‹› Tightening specification - 4 Nm
18
Bolt
‹› Tightening specification - 7.5 Nm
19
Lower Part of Support Foot
‹› For front center armrest