Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7427001.png)
Arm Rest: Service and Repair
Front Center Armrest Upper Trim
Front Center Armrest Upper Trim
Removing
-
Remove front center armrest padding.
-
Remove bolts - arrows -.
-
Fold front center armrest up.
‹› Shown with front center armrest removed in illustration.
-
Using a screwdriver, unclip upper trim all around from center armrest lower trim - arrows -.
Installation
To install, perform the steps used in removal in reverse order.
‹› Tightening specifications, refer to => [ Front Center Armrest Component Overview ] See: .
