Q7 Quattro V6-3.6L (BHK) (2007)
Carpet: Service and Repair
Front Floor Covering, Removing and Installing
Front Floor Covering, Removing And Installing
CAUTION: Observe safety precautions for work on airbags.
-
Remove front seats with seat frames.
-
Mechanically adjustable seat
-
Memory seat, electric seat
-
Remove lower A-pillar trim on left and right.
-
Remove drivers side and passengers side footwell covers.
-
Remove base support cover.
-
If present, install foot vent connector station covers or trim, etc.
-
Remove center console.
-
Remove two buttons.
-
Fold floor covering lengthwise and remove through a door.
Installing
Installation is reverse of removal. Observe the following when doing so:
NOTE: Carefully install floor covering in order to avoid damage.
-
Slide front floor covering all the way forward and secure the two press buttons.