Q7 Quattro V6-3.6L (BHK) (2007)
Console: Service and Repair
Driver Seat Console
Driver Seat Console
Removing
CAUTION!
Observe safety precautions for work on airbags refer to => [ Airbags ] See: Restraint Systems/Air Bag Systems/Service and
Repair/Removal and Replacement/Airbags.
-
Remove front seat.
‹› Mechanically adjustable seat refer to=> [ Front Driver Seat Overview ] See: Seats/Service and Repair/Removal and Replacement/Front Manual
Seats
‹› Memory seat, electric seat refer to=> [ Front Driver Seat Overview ] See: Seats/Service and Repair/Removal and Replacement/Power Front
Memory Seats/Front Driver Seat Overview
-
Remove front console trim.
-
Remove left console trim.
-
Remove the bolts - 1 -.
-
Remove console - 2 -.
Installing
CAUTION!
Observe safety precautions for work on airbags refer to=> [ Airbags ] See: Restraint Systems/Air Bag Systems/Service and
Repair/Removal and Replacement/Airbags.
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
‹› Bolts are micro-encapsulated and must be replaced after each loosening.