Q7 Quattro V6-3.6L (BHK) (2007)
Headliner: Service and Repair
Partition Grille Mount
Partition Grille Mount
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Unclip partition grille mount cover - 2 - with Trim Removal Wedge (3409).
-
Move cover cap - 1 - to side and remove screw - 3 - behind on partition grille mount - 4 -.
-
Remove mount from headliner and body.
‹› Threaded screw holes - 3 - must always be cleaned (for example, with thread cutter)
‹› If threaded hole is not cleaned, there is the danger that the new screw could seize up during installation and shear off when removed again.
Installation