Q7 Quattro V6-3.6L (BHK) (2007)
‹› For partition grille mount
‹› Must be unclipped to remove and install headliner
‹› After unclipping, hangs from partition grille mount and cannot be removed
‹› Partition grille mount, removing and installing, refer to => [ Partition Grille Mount ] See:
3
Bolt
‹› 3 Nm
‹› Approximately. 19 mm long
‹› If 2 screws of different lengths are installed, shorter screw for securing sun visor must be installed at front of direction of travel.
4
Bolt
‹› 3 Nm
5
Passenger Side Sun Visor
‹› Some vehicles are equipped with a double sun visor
6
Driver Side Sun Visor
‹› some vehicles are equipped with a double sun visor
7
Center Cover
‹› for interior light/front reading light
8
Decorative Frame
‹› for center cover
9
Diffusion Lens
‹› for interior light/front reading light
10
Bolt
‹› 2 Nm
11
Interior Light/Front Reading Light
12
Bolt
‹› 3 Nm
13
Sun Visor Center Bearing
14
Bolt
‹› 2 Nm
15
Front Roof Grab Handle
‹› Removing and Installing, refer to => [ Roof Grab Handle ] See:
16
Screw, Self-locking
‹› 4 Nm
‹› Replace