Q7 Quattro V6-3.6L (BHK) (2007)
Headliner: Service and Repair
Headliner
Headliner
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
CAUTION!
‹› Follow the safety precautions for pyrotechnic components. Refer to => [ Restraint System Components, Checking ] See: Restraint
Systems/Air Bag Systems/Testing and Inspection.
‹› Note the additional safety precautions when working on the side curtain airbag. Refer to => [ Side Curtain Airbag Additional Safety
Precautions ] See: Restraint Systems/Air Bag Systems/Air Bag/Service Precautions/Side Curtain Airbag Additional Safety
Precautions.
-
Remove upper A-pillar trim on left and right. Refer to=> [ Upper A-pillar Trim Component Overview ] See: Service and Repair/Removal and
Replacement/Upper A-Pillar Trim.
-
Fold 2nd row backrests and, if present, 3rd row backrests forward.
-
Move the driver and passenger seat all the way forward.
-
Move the backrests on the driver and passenger seat as far back as possible.
-
Remove B-pillar trim on left and right. Refer to=> [ B-pillar Trim Component Overview ] See: Service and Repair/Removal and
Replacement/B-Pillar Trim.
-
Remove left and right C-pillar trim from body. Refer to => [ C-pillar Trim Component Overview ] See: Service and Repair/Removal and
Replacement/C-Pillar Trim.
‹› C-pillar trim can be left hanging on seat belt webbing.
‹› To remove C-pillar trim, wheel housing trim must be removed from body.
‹› In order to remove trim, belt webbing must be guided out from seat belt through trim. That is not necessary when removing trim.
-
Remove roof panel trim. Refer to => [ Roof Panel Trim Component Overview ] See: Service and Repair/Removal and Replacement/Roof Panel