Q7 Quattro V6-3.6L (BHK) (2007)
Trim Panel: Service and Repair
Outer Part Left Side Trim Panel
Outer Part Left Side Trim Panel
Removing
-
Remove the 2nd row seat bench. Refer to => [ 2nd Row Assembly Overview, 3-Seater ] See: Seats/Description and Operation/2nd Seat Row,
3-Seater.
-
First press outer part of left side trim panel - A - off inner part of left side trim panel - B - all around - arrow 1 - using a screwdriver.
-
Then turn trim panel in rear area toward outside - arrow 2 - and at the same time, pry trim panel out with a screwdriver in lower area (clip) -
arrow 3 -.
-
Then press trim out of upper catch - arrow 4 - and slide it in - direction of arrow 5 - off backrest.
Installation