Q7 Quattro V6-3.6L (BHK) (2007)
Trim Panel: Service and Repair
Lower Left Rear Side Trim Panel
Lower Left Rear Side Trim Panel
‹› Removal and installation of right rear side trim panel is the same.
Removing
-
Remove the 2nd row seat bench. Refer to => [ 2nd Row Assembly Overview, 3-Seater ] See: Seats/Description and Operation/2nd Seat Row,
3-Seater.
-
Pry trim panel - 1 - off in rear area - arrow A - with a screwdriver and remove it at the same time in front area - arrow B -.
Installation
-
Press trim panel into backrest until it engages.
-
Install the 2nd row seat bench. Refer to => [ 2nd Row Assembly Overview, 3-Seater ] See: Seats/Description and Operation/2nd Seat Row,
3-Seater.