Q7 Quattro V6-3.6L (BHK) (2007)
Trim Panel: Service and Repair
Easy Entry Trim Panel
Easy Entry Trim Panel
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Remove handle - 1 -.
-
Unclip trim panel - 2 -. Use Trim Removal wedge (3409) to do this.
-
Begin unclipping at - arrow A - and then - arrow B -.
-
Remove trim - 2 - in - direction of arrow -.
Installing
To install, perform the steps used in removal in reverse order.