Q7 Quattro V6-3.6L (BHK) (2007)
Utility Storage Compartment: Service and Repair
Multibox
Multibox
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Move the center armrest - 6 - all the way up and then open it up - 6 -.
-
Unclip box - 5 - at rear with trim removal wedge (3409).
-
Tip box - 5 - upward.
-
Unclip front cover - 4 - with Trim Removal Wedge (3409) and remove it.
-
Remove screws - 3 - (Qty. 4).
-
Remove Multibox - 2 - from front bracket - 1 - and rear bracket - 7 -.
Installing
To install, perform the steps used in removal in reverse order.