Q7 Quattro V6-3.6L (BHK) (2007)
Utility Storage Compartment: Service and Repair
Release Cable
Release Cable
Removing
-
Remove the center armrest trim.
-
Remove the center armrest support base trim.
-
Remove center armrest upholstery.
-
Remove the right gas-filled strut.
-
Remove the cable ties - 1 -.
-
Loosen the lock nuts - 2 - and disengage the cable - 5 -.
-
Unclip trim panel - 4 -. "Be sure not to damage the trim".
-
Remove the cable completely - 2 -.
Installing
To install, perform the steps used in removal in reverse order.
Tightening specification => [ Multibox Component Overview ] See:
-
Before installing the center armrest support base trim, adjust the cable => [ Cable, Adjusting ] See: .