Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7649002.png)
-
Drive out hinge pin - 3 - - arrow - at left and right with cotter pin driver dia. 4 mm - item 1 -.
-
Note compensation disc on right side - 2 -.
-
Open glove compartment cover by pulling cable.
-
Remove glove compartment cover and lead cable out of glove compartment.
Installation
Installation is reverse of removal, but note the following:
-
Note compensation disc - 2 - when inserting right hinge pin.
-
Adjust glove compartment cover cable. Refer to => [ Glove Compartment Cover Cable, Adjusting ] See: Storage Compartments and Covers
Overview.
