Q7 Quattro V6-3.6L (BHK) (2007)
Keyless Entry Transmitter: All Technical Service Bulletins
Locks - Central Locking Locks When Ign Key Removed
57 Central locking locks up when removing ignition key from ignition lock
57 10 32
2018737/5
September 1, 2010
Supersedes Technical Service Bulletin Group 57 number 10-31 dated August 12, 2010 for reasons listed below.
AFFECTED VEHICLES
CONDITION
Customer may complain that the vehicle locks itself when removing the key from the ignition lock.
TECHNICAL BACKGROUND
When removing the ignition key from the ignition, the customer may unintentionally operate the lock button of the remote key.
With the S contact in the ignition lock off, the central locking responds to signals from the remote key.
MVB 17 in 46 - Comfort System Central Control Module can be used for argumentation. The last received central locking command is stored in this
MVB. The value 2 indicates a locking - command from the remote key.
PRODUCTION SOLUTION
Not applicable.
SERVICE
Not applicable.
WARRANTY
This TSB is informational only and not applicable to any Audi warranty.
ADDITIONAL INFORMATION
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.