Q7 Quattro V6-3.6L (BHK) (2007)
-
Installation is reverse of removal, noting the following.
-
Secure shade bracket in crossmember, tightening nut to 4.5 Nm.
-
Slide shade molding into arch and install slider.
-
Remove securing pins.
-
Slide slider with arch into guide tracks.
-
If necessary, position arch diagonally in guide tracks for this.
-
Press damper - 1 - into guide rail.
-
Re-install panel 2 and 3.
-
Perform panel 3 adaptation.