Q7 Quattro V6-3.6L (BHK) (2007)
CAUTION!
Glide pieces - 2 - in tilting mechanism - 3 - must face toward back when sliding - arrow - into rail - 1 -.
-
The tilting mechanisms - 2 - must not be slid into top - arrow - of guide rail - 1 -.
-
Only slide tilting mechanisms - 2 - in and forward as far as stop - arrow - with a screwdriver at places shown in magnified area of illustration -
arrow -.
‹› The tilting mechanism end position - 3 - from the panel 1 is reached when the plastic guide - 2 - dips into the end piece and the guide is lowered.