Q7 Quattro V6-3.6L (BHK) (2007)
1
Sunroof frame
2
Trim
‹› Removal:
-
Position panel 3.
-
Unclip trim in center and move slightly to side.
-
Slide trim back until it can be removed from keyhole-shaped hole.
‹› Installing:
-
Installation of each trim panel occurs in reverse sequence. This engages trim in panel.
3
Panel 3
‹› Removal:
-
Position panel 3.
‹› Small markings (3 each) applied to plastic edge of panel that make it easier to find screw positions.
-
For removal, remove side securing screws.
-
Remove panel 3 upward.
-
Installing: