Q7 Quattro V6-3.6L (BHK) (2007)
Head Rest: Service and Repair
Outer Headrest Cover, Removing and Installing
Outer Headrest Cover, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
-
Unclip headrest cover - 2 -.
Begin unclipping on rear side of headrest cover.
Use Trim Removal Wedge 3409 to unclip.
-
Remove headrest cover - 2 - from headrest carrier - 1 -.
-
Pull loop - 3 - out of headrest cover.
Installing
Installation is reverse of removal. Observe the following when doing so:
-
Before clipping headrest cover, pull loop through opening in cover.
-
Ensure headrest cover is clipped in correctly.