Q7 Quattro V6-3.6L (BHK) (2007)
Head Rest: Service and Repair
Headrest Cable, Removing and Installing
Headrest Cable, Removing And Installing
Removing
-
Remove the headrests.
-
Unclip upper part of headrest carrier - 2 - from lower part - 3 -.
-
Pull loop - 1 - through upper part of headrest carrier.
-
Spread tab - 3 - and disengage nipple - 2 - on cable - 6 -.
-
Press bracket - 3 - together and remove cable - 6 - from lower part of headrest carrier - 5 -.
Installing
Installation is reverse of removal. Observe the following when doing so: