Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove airbag - 1 - from pocket and re-engage airbag in backrest frame.
-
Remove cover and padding.
Installation
Installation is in reverse order of removal, noting the following:
Tightening Specifications
Airbag screw. Refer to => [ (Item 12) Side Airbag ] See: Service and Repair/Overhaul/Seats - Upholstery, Covers/2ND Row Seat/Covers and
Cushion, 2nd Row Two-Thirds Bench Seat without Center Seat
Center seat belt screw. Refer to => [ (Item 7) Center Seat Belt ] See: Service and Repair/Overhaul/Seats - Upholstery, Covers/2ND Row Seat/Covers
and Cushion, 2nd Row Two-Thirds Bench Seat without Center Seat
Separating cover from padding:
1
Cover and Upholstery
2
Upholstery Clips
Removing
-
Cut upholstery clips - 2 -.