Q7 Quattro V6-3.6L (BHK) (2007)
-
Cut upholstery clips - 2 -.
-
Remove the cover - 1 - from the cushion - 3 -.
Version B clip => [ (Item 4) Clip ]
-
Pry cover wire - 3 - out with a screwdriver from behind - direction of arrow A - out of clip - 2 -.
-
Do the same with all other clips.
-
Remove the cover - 1 - from the cushion - 4 -.
Installation
Installation is in reverse order of removal, noting the following:
-
When installing new upholstery clips, use Upholstery Clip Pliers (V.A.G 1634).