Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove lower retaining strips - 3 -.
-
Remove side retaining strips - 2 -.
-
Pry out upper retaining strip - 1 -.
-
Remove side airbag.
-
Remove the bolt - 3 -.
-
Loosen airbag cable retainers - 4 - on backrest frame.
-
Press airbag - 1 - in - direction of arrow A - upward and disengage airbag from backrest frame refer to => [ Front Airbag Igniters, Standard
Power Seat ] See: Restraint Systems/Air Bag Systems/Service and Repair/Removal and Replacement/Airbags.
-
Remove airbag - 1 - from pocket - 2 - and re-engage airbag in backrest frame.
-
Remove upholstery with cover.
Installing
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Replace airbag screw => [ (Item 4) Bolt ] See: Description and Operation/Front Seat, Mechanically Adjustable, Cushion and Upholstery.
Vehicles equipped with a mount for a DVD player: