Q7 Quattro V6-3.6L (BHK) (2007)
Seat Cushion: Service and Repair
Headrest Cushion and Upholstery, With Locking Mechanism
Headrest Cushion and Upholstery, with Locking Mechanism
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Remove headrests.
‹› Manual seats: Vehicles without Rear Seat Entertainment Screen refer to => [ Headrests with Locking Mechanism ] See: Service and
Repair/Removal and Replacement/Front Manual Seats, Vehicles with Rear Seat Entertainment Screen refer to => [ Head Restraints with Rear Seat
Entertainment Screen ] See: Service and Repair/Removal and Replacement/Front Manual Seats
‹› Memory seat, power seat: Vehicles without Rear Seat Entertainment Screen => [ Headrests with Locking Mechanism ] See: Service and
Repair/Removal and Replacement/Power Front Memory Seats, Vehicles with Rear Seat Entertainment Screen, refer to => [ Head Restraints with
Rear Seat Entertainment Screen ] See: Service and Repair/Removal and Replacement/Power Front Memory Seats
-
Disengage sill panel strips - 2 - from guide channel - 1 - by prying with Trim Removal Wedge (3409).
-
Use Trim Removal Wedge (3409) to lift cover over knob trim plate - 3 -.
-
Remove the headrest mount - 1 - from the cushion and cover - 2 -. Begin on side opposite to knob - 3 -.
-
Remove padding from cover.