Q7 Quattro V6-3.6L (BHK) (2007)
-
Cut upholstery clips - 2 -.
-
Remove the cover - 1 - from the cushion - 3 -.
Version B clip
-
Pry cover wire - 3 - out with a screwdriver from behind - direction of arrow A - out of clip - 2 -.
-
Do the same with all other clips.
-
Remove the cover - 1 - from the cushion - 4 -.
Installing
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
When installing new upholstery clips, use Upholstery Clip Pliers (V.A.G 1634).