Q7 Quattro V6-3.6L (BHK) (2007)
Seat Heater: Service and Repair
Seat Heating Element, Removing and Installing
Seat Heating Element, Removing And Installing
Removing
-
Remove seat pan cover:
-
2nd row seat bench (two-thirds bench).
-
Cut wire - 2 - off of old heating element - 1 -.
Installing
-
Align new heating element - 1 - on seat padding.
-
Remove protective foil and attach heating element to padding surface.
-
Route connecting wires at locations - 3 - in bottom of gaps, avoiding crossover.
NOTE: It is attached over old heating element.