Q7 Quattro V6-3.6L (BHK) (2007)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Cover, Removing and Installing
Plenum Chamber Cover, Removing And Installing
1
-
Plenum chamber cover
-
To remove, first unclip from plenum chamber bulkhead
NOTE: For easier removal/installation, coat edge strip with some soap.
-
Remove plenum chamber cover upward diagonally from edge strip beginning at window edge.
CAUTION:
-
Danger of window breaking.
-
When installing, plenum chamber cover must not be driven on. Carefully press plenum chamber coverinto edge strip.
2
-
Windshield
3
-
Clip
-
Is clipped into plenum chamber bulkhead