Q7 Quattro V6-3.6L (BHK) (2007)
‹› Tightening specification, 15 Nm
6
Brake caliper
‹› Do not remove brake line when replacing brake disc
‹› Removing and installing, refer to => [ Brake Caliper, 18" Plus ] See: Brake Caliper, 18" Plus
‹› Remove for changing brake pad
‹› Brake Pads, Removing and Installing, refer to => [ Front Brake Pads, 18" Plus ] See: Disc Brake System/Brake Pad/Service and Repair/Front
Brake Pads, 18" Plus
‹› Servicing, refer to => [ Front Brake Caliper Assembly Overview ] See: Front Brake Caliper Assembly Overview
‹› Except for "servicing front brake caliper", it is not permitted to perform repairs to the brake caliper.
7
Bolt
‹› Tightening specification: 270 Nm
‹› Loosen brake caliper on these bolts only
8
Brake pad wear display cable
9
Brake hose
‹› Make sure that lugs are properly seated in grooves in bracket.