Q7 Quattro V6-3.6L (BHK) (2007)
Brake Caliper: Removal and Replacement
Brake Caliper, Removing and Installing
Brake caliper, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G. 1332
^
Socket XZN 16 T10198
^
Brake pedal actuator V.A.G. 1869/2
Removing
-
Remove wheels.
-
Connect bleeder hose of bleeder bottle to bleeder valve of brake caliper and then open bleeder valve.
-
Insert brake pedal depressor V.A.G. 1869/2.
-
Close bleeder valve and remove bleeder bottle.
-
Remove brake line from brake caliper.
-
Remove brake pads.
-
Pull wheel speed sensor wire out of bracket at brake caliper.
-
Remove brake caliper from wheel bearing housing.
Installing
-
Bolt brake caliper onto wheel bearing housing.
-
Install brake pads.
-
Install brake line on brake caliper.