Q7 Quattro V6-3.6L (BHK) (2007)
/Page-4106001.png)
Brake Hose/Line: Removal and Replacement
Brake Line Repairs
Brake line repairs
Flare brake lines using Flaring Tool VAS 6056 without damaging coating. In this way, brake lines can be inexpensively partially replaced in certain
cases.
Work with brake line kit V.A.B. 1356 is not permitted because of the coating and diameter of black brake lines.
Note:
^
Brake lines must not be bent more than 90°, otherwise they kink or deform causes unacceptable constriction in the line.
^
Disconnect brake lines preferably at vehicle floor.
^
Position of intermediate pieces should be selected so that they cannot rub against moving parts.
^
Do not lubricate spindle, clean only with mineral spirits.
Special tools, testers and auxiliary items required
^
Brake line flaring appliance VAS 6056
Listing of individual tools: