Q7 Quattro V6-3.6L (BHK) (2007)
Vacuum Pump: Service and Repair
Brake System Vacuum Pump V192, Removing and Installing
Brake system vacuum pump V192, removing and installing
It is not possible to service Brake System Vacuum Pump V192. If there is a malfunction, replace Brake System Vacuum Pump V192
Removing
-
Disconnect connector - 1 -.
-
Disconnect vacuum hose - 2 - from Brake System Vacuum Pump V192
-
Disengage clip in direction of - arrow - and remove.
-
Remove Brake System Vacuum Pump V192 upward from bracket.
Installing
Installation is in reverse order of removal.