Q7 Quattro V6-3.6L (BHK) (2007)
Vacuum Pump: Service and Repair
Mechanical Vacuum Pump
Mechanical Vacuum Pump
Removing
-
Remove intake manifold.
-
Remove cylinder head cover => [ Cylinder Head Cover ] See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Valve Cover/Service
and Repair.
-
Free up electrical wiring harness.
-
Disconnect vacuum line - A -.
-
Remove bolts - arrows -.
-
Carefully remove vacuum pump from cylinder head.
‹› If the sealing ring is still on the input shaft, it must be removed and placed on the vacuum pump.
‹› A new vacuum pump is delivered with a sealing ring; 2 rings cannot be installed.
Installing
‹› Tightening specifications => [ Mechanical Vacuum Pump, Assembly Overview ] See: Mechanical Vacuum Pump, Assembly Overview.
-
Check location of sealing ring - A -: