Q7 Quattro V6-3.6L (BHK) (2007)
-
Rotate fasteners - 2 - approximately 45° left and remove.
-
Remove the adaptive cruise control sensor (G550) forward through the bumper cover.
-
Remove screws - 2 -.
-
Remove bracket upward and out between bumper and bumper cover.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
‹› Studs in bracket are preset. If necessary, correct adjustment.
-
Place the Adaptive Cruise Control Sensor (G550) on a soft, clean cloth.
Measure dimension - a - of all studs.