Q7 Quattro V6-3.6L (BHK) (2007)
Heater Core: Service and Repair
Left Heater Core Covers - Front Heating and A/C Unit Installed
Left Heater Core Covers - Front Heating and A/C Unit Installed
Removing
-
Remove lower left instrument panel trim.
-
Remove accelerator pedal module.
-
Release relay carrier (with control modules) which is installed in left area next to heating & A/C unit and set it aside.
-
Remove bolts - A - and - B -.
‹› If bolt - B - is not accessible due to unfavorable tolerances, carefully separate section - E - from cover, then press cover - D - carefully toward left
from floor carpet to remove the bolt.
-
Disengage cover - D - from the mounting points - C -, the catch at pass-through for coolant pipes and from the wiring harness secured to the upper
side.
Installing
-
Install the removed components again in reverse order.