Q7 Quattro V6-3.6L (BHK) (2007)
Camshaft: Service and Repair
Camshafts
Special tools, testers and auxiliary items required
‹› Adhesive lubricating paste
Removing
‹› During installation, all cable ties must be reinstalled at the same location.
-
Remove camshaft timing chain from camshafts => [ Camshaft Timing Chain, Removing from Camshafts ] See: Timing Components/Timing
Chain/Service and Repair/Camshaft Timing Chains, Removing From Camshafts.
-
Remove control housing - arrows - carefully remove from camshaft compression rings.
-
Lay aside camshaft timing chain.
-
Remove intake camshaft - A - as follows:
1. Remove bearing caps 1 and 13.
2. Remove bearing caps 3 and 11.
3. Remove bearing cap 7.
4. Loosen bearing caps 5 and 9 alternately and in diagonal sequence, and remove.