Q7 Quattro V6-3.6L (BHK) (2007)
Engine Accessory Bracket: Service and Repair
Accessory Bracket
Removing
-
Remove ribbed belt => [ Ribbed Belt ] See: Drive Belt/Service and Repair/Ribbed Belt.
-
Remove generator.
-
Remove air conditioner compressor. Refer to => Heating and Air Conditioning See: Heating and Air Conditioning.
-
Remove bolts - 1 to 5 - and remove accessory bracket.
Installing
‹› Tightening specifications => [ Ribbed Belt Drive, Assembly Overview ] See: Drive Belt/Service and Repair/Ribbed Belt Drive, Assembly
Overview.
Installation is in reverse order of removal, note the following:
-
Tighten accessory bracket bolts => [ Accessory Bracket Tightening Sequence ] See: Drive Belt/Service and Repair/Ribbed Belt Drive, Assembly
Overview
-
Install A/C compressor. Refer to => Heating and Air Conditioning See: Heating and Air Conditioning.
-
Install power steering pump.
-
Install generator.
-
Install ribbed belt tensioner => [ Ribbed Belt Tensioner ] See: Drive Belt Tensioner/Service and Repair.
-
Install ribbed belt => [ Ribbed Belt ] See: Drive Belt/Service and Repair/Ribbed Belt.