Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove oil cooler from engine support with oil filter housing.
-
Place drip tray (VAS 6208) under engine.
-
Clamp off coolant hoses with hose clamps hose clamps (3094).
-
Remove coolant hoses from oil cooler - arrows - and remove oil cooler.
Installing
‹› Tightening specifications => [ Oil Cooler and Left Engine Support with Oil Filter Housing, Assembly Overview ] See: Oil Cooler and Left Engine
Support with Oil Filter Housing, Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace sealing rings.
-
Check oil level
-
Check coolant level => [ Check coolant level. ] See: Cooling System/Service and Repair.
-
On a vehicle with air suspension, deactivate vehicle lift mode.