Q7 Quattro V6-3.6L (BHK) (2007)
-
Free up electrical wiring harness on oil pan.
-
Remove oil pan to transmission connection bolts - arrows -.
-
Loosen oil pan bolts - 1 - diagonally and remove.
-
If oil pan is stuck, tap lightly with rubber hammer to loosen.
-
Place oil pan on subframe.
-
Remove bolts - arrows - and remove oil pump intake tubes.
-
Remove oil pan.
Installing
‹› Tightening specifications => [ Oil Pan, Assembly Overview ] See: Oil Pan, Assembly Overview, => [ Oil Pan Tightening Sequence ] See: Oil Pan,
Assembly Overview
Installation is in reverse order of removal, note the following:
‹› Replace sealing rings.
-
Carefully remove sealant residue on cylinder block.
CAUTION!
Risk of eye injury.